Corotherm Clickfit Leaflet (PDF, opens a new tab)
PDF · discovered on the published product page. File version and current applicability require confirmation.
Multiwall polycarbonate / Product information
Breather tape with a fabric membrane to allow free movement of air within the Corotherm Clickfit DIY polycarbonate roof.
Prevents damage due to thermal expansion whilst minimising condensation and preventing dust or insects entering the panels. Supplied in 10m rolls.

Published product information
Fabric membrane allows free air movement inside the panel structure
Minimises condensation
Prevents ingress of dust and insects
Sold in 10m rolls
38mm width for use with 16mm Corotherm Clickfit panels
Easy to use
Verandas
Canopies
Carports
Refer to the Corotherm Clickfit installation guide and installation video for complete installation instructions.
General Apply breather tape to the bottom end of the Corotherm Clickfit easy fit polycarbonate roofing panel to minimise condensation and prevent dust or insects entering the panel. The breather tape must be covered with an end cap sealed to the top end of the sheet with a small silicone bead.
Product Options
| Product Code | Description | Colour | Length (mm) | Use with |
|---|---|---|---|---|
| BSTP | BreatherTape (38mm x 10m) | Blue | 10,000 | 16mm Panel |
Supporting resources
PDF · discovered on the published product page. File version and current applicability require confirmation.
PDF · discovered on the published product page. File version and current applicability require confirmation.
Linked in the published catalogue

Multiwall polycarbonate
Stainless steel channel washer for use in fixing Corotherm Clickfit easy fit polycarbonate roofing panels.
View product
Multiwall polycarbonate
Aluminium 'F' profile for use at the side edges of a Corotherm Clickfit roof. Available to suit 16mm multiwall polycarbonate roofing panels, this accessory provides an aesthetic…
View product
Multiwall polycarbonate
Aluminium sheet end cap clips along the outside edge of a Corotherm Clickfit roof to provide extra strength and a professional look. The items is sold in 3m lengths.
View product
Multiwall polycarbonate
Aluminium tape to seal the top edge of Corotherm Clickfit panels, preventing the ingress of dirt, insects and algae. Supplied in 10m rolls.
View product
Multiwall polycarbonate
A sticky butyl strip suitable for flashing up against many types of surface, providing a watertight seal without the need to dress into the wall. Supplied in 10m rolls.
View product
Multiwall polycarbonate
White, neutral cure, low modulus silicone sealant fully compatible with Corotherm Clickfit easy fit polycarbonate roofing panels.
View productRange & components
Corotherm multiwall polycarbonate is the light weight, impact resistant, insulating glazing sheet from Ariel Plastics. Suitable for a wide range of roofing and glazing applicati…
Explore rangeRange & components
The professionally engineered Self Supporting Roofing System available from Ariel Plastics free-spans 4.0m and accommodates 16mm, 25mm and 35mm multiwall polycarbonate roofing s…
Explore rangeRange & components
Ariel Plastics offer a full range of multiwall polycarbonate installation accessories for your timber supported roofing system. The timber supported roofing accessories include …
Explore rangeRange & components
Corotherm Clickfit is an easy fit polycarbonate roofing panel from Ariel Plastics. The 16mm multiwall polycarbonate roofing panels click and lock together, no glazing bars requi…
Explore rangeProduct & project support
Keep this product context with your enquiry and let Ariel confirm the next step.
Content imported from Ariel’s published product information, captured 27 October 2026. Final technical/content approval is pending; current stock, delivery and warranty assurances are not asserted. Source reference (opens a new tab) ↗