Plain Interlocking Tile Dry Fix Valley Trough

Published product information

Detail & guidance

• Mortar free Universal dry fix valley

• 3 height options for different tile requirements

• BBA Approved Cert. No. 89/2153

• No wet trades needed, can be fitted in any weather

• At least as durable as lead and similar in appearance

• No clips needed, reducing time and hassle on site

• Smooth surface inhibits the growth of moss & lichen and build-up of debris

• Fire resistant to SAB to BS476 part 3 and Class 3 to BS476 part 7

ideal for

• Suitable for use on roofs with pitches from 22.5° to 49°

• Can accommodate a maximum difference between two rafter pitches of 10°

Please contact our Technical Department who will be happy to advise on installation instructions.

Plain Interlocking Tile Valley DVA/DVB

Installation

• Valley boards should be fitted of sufficient width to provide support for the roofing battens, either: min.12mm ply lay boards set between rafters, or 6mm continuous ply boards laid over the rafters.

• A single strip of roofing underlay should be laid up the centre of the valley.

• Counter battens the same depth as the roofing battens should be fitted onto the valley boards.

• The main roofing underlay should be laid over the counter batten. Roofing battens should be fitted with the ends firmly located onto the valley boards, positioned close to the counter batten, with care taken to avoid damaging the underlay.

• The fascia board should be cut to allow the GRP valley trough to pass through and discharge into the gutter without flattening out. The end of the GRP valley trough should be trimmed using a fine toothed hacksaw to the appropriate centre line of the gutter - which normally entails a ‘v’ shaped cut.

• The GRP valley trough should be fitted with care taken to ensure it is centrally located between the valley boards: the sides should be nailed to the counter battens at max: 500mm centres.

Properties

LEAD REPLACEMENT GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to CORODRAIN GRP. Coloured lead grey as standard (other colours available on request). DURABILITY Made with high quality un-filled polyester resin with glass fibre reinforcement for maximum strength. A tough bonded melinex film gives excellent weathering performance. Minimum life of 30 years. MANUFACTURED IN UK Manufactured to BS EN ISO 9001:2008 quality standard, our automated continuous pultrusion plant in Coventry. NO MAINTENANCE The inherent qualities of the materials make the valleys UV light and acid rain resistant, and the smooth surface finish inhibits the growth of moss, lichen and the build up of debris.

Valley Weights Standard valley troughs: 1.64kg/m²

Heavy Duty valley troughs: 2.10kg/m²

Valley Thicknesses

Standard valley troughs: 1.3mm

Heavy Duty troughs: 1.6mm