TV3SN-110 Ridgeline Vent with Extension Sleeve and 110mm Pipe Adaptor Data Sheet (PDF, opens a new tab)
PDF · discovered on the published product page. File version and current applicability require confirmation.
Roof ventilation / Product information
Ridgeline Vent TV3SN
The Corovent TV3SN Ridgeline Vent incorporates an extensive sleeve and a pipe terminal that can provide either 110mm or 125mm connections.
- Strong & secure
- Attractive finish
- Simple to install - no need to cut
Published product information
Detail & guidance
Strong & secure
Attractive finish
Simple to install - no need to cut
Tile matching service available
ideal for
Heritage Projects
Conservation Projects
Full installation details are available on request from the Technical Department.
Installation: Ridge Vent
Hold ridge vent in position and mark the underfelt directly below the ridge vent outlet. Cut and remove the underlay as marked.
Bed ridge vents in mortar in a similar manner to the standard ridges. Nail the retaining straps to rafters/ridge board.
Complete ridge in normal manner.
If using pipe adaptor, clip felt sleeve and attach CTIC flexitube, after fitting into roof.
Supporting resources
Documents for this range
Open
TV3SN-125 Ridgeline Vent with Extension Sleeve and 125mm Pipe Adaptor Data Sheet (PDF, opens a new tab)
PDF · discovered on the published product page. File version and current applicability require confirmation.
Linked in the published catalogue
Related products & components
Roof ventilation
Narrow Extension Sleeve NES
The Corovent narrow extension sleeve is suitable for short ridge roof vents less than 400mm.
View product
Roof ventilation
Pipe Adaptor COA1
The Corovent CAO1 Pipe Adaptor provides a 110mm diameter outlet as standard which can be cut down to provide a 125mm diameter section if needed.
View productRange & components
Tile and Slate Roofline Vents
Corovent Roofline vents are made to blend in discreetly with existing roof tiles. They incorporate a factory fitted round felt sleeve which penetrates the felt, so no extra slee…
Explore rangeRange & components
Tile and Slate Cowl Vents
Corovent Cowl vents offer unobtrusive low or high level ventilation in tile roofs. The Cowl vent can blend almost invisibly to any roof: new build or conservation, because of Ar…
Explore rangeRange & components
Ridgeline Vents
Corovent Ridgeline Vents are designed to replace a normal ridge tile suiting most concrete and clay ridges. Their unique design allows them to be fitted without cutting any exis…
Explore rangeRange & components
Eaves Ventilation
Eaves ventilation is a simple and effective way of providing the necessary air movement within a cold roof. It is most effective when used in conjunction with high level roof ve…
Explore rangeRange & components
Rafter Trays
The rafter tray maintains a clear air space of either 10 or 25mm from the eaves to the roof void, by creating a barrier for the roofspace insulation.
Explore rangeRange & components
Soffit Vents
Ariel provide a range of soffit vents designed for use with a traditional fascia and soffit board. Available in black, brown or white, soffit vents can be used with any roof pitch.
Explore rangeRange & components
Ventilation Accessories
An extensive range of high quality ventilation accessories for easier and quicker installation of Corovent Roof Ventilation products.
Explore rangeProduct & project support
A question about Ridgeline Vent TV3SN?
Keep this product context with your enquiry and let Ariel confirm the next step.
Source & review information
Content imported from Ariel’s published product information, captured 27 October 2026. Final technical/content approval is pending; current stock, delivery and warranty assurances are not asserted. Source reference (opens a new tab) ↗