CV10K Cowl Vent Data Sheet (PDF, opens a new tab)
PDF · discovered on the published product page. File version and current applicability require confirmation.
Roof ventilation / Product information
Interlocking and Plain Tile Cowl Vent (Small) CV10K/CP10K
A low profile cowl vent featuring a small cowl providing 10,000mm 2 ventilation area.
More about this product
The cowl incorporates barriers to prevent water ingress and block wind driven rain, allowing the water to drain away downslope. Ariel Plastics have a comprehensive range of tile cowl vents available to match most known plain and profiled tiles, with specials available on short lead times. A colour matching service ensures that even on a weathered roof the Corovent will blend discreetly with the existing tiles.
- Incorporates barriers to prevent water ingress
- Provides 10,000mm 2 of ventilation
- CV10K features a large spigot for roof ventilation
Published product information
Detail & guidance
Incorporates barriers to prevent water ingress
Provides 10,000mm 2 of ventilation
CV10K features a large spigot for roof ventilation
CP10K features a pipe terminal for either 110mm or 125mm connections
Can be made to suit a wide range of tiles and slates (please check for availability)
Colour matching service available
One felt sleeve (FW1) is supplied with each unit
ideal for
Roof pitches over 20°
Full installation details are available on request from the Technical Department.
Tile Cowl Vent Technical Data
| Tile Vent | Ventilation Area | Airflow Resistance | Roof Pitches | Water Resistance |
|---|---|---|---|---|
| CV10K | 10 000mm2 | N/A | Over 20° | Exceeds all relevant parts of DoE Partners in Technology Programme |
| CP10K | 10 000mm2 | 18.5 Pascals @ 30ltr/sec | Over 20° | Exceeds all relevant parts of DoE Partners in Technology Programme |
Installation: Cowl or Roofline Vents for Tile Roof
Complete roofing to one course below the position for the tile vent.
Hold vent in position as centrally as possible between the rafters and mark where the vent spigot touches the underlay.
Cut underlay in a cross, fold up and back.
Insert felt weir, if using, under batten above opening, positioning it centrally above the hole.
Nail felt weir to the batten.
Nail felt over the battens.
Supporting resources
Documents for this range
Open
CP10K Cowl Vent Data Sheet (PDF, opens a new tab)
PDF · discovered on the published product page. File version and current applicability require confirmation.
Linked in the published catalogue
Related products & components
Roof ventilation
Felt Weir FW1
The Corovent Felt Weir features ridges which guide any condensation or rainwater away from the opening in the felt when fitting any roof vents. It helps to ensure that no moistu…
View productRange & components
Tile and Slate Roofline Vents
Corovent Roofline vents are made to blend in discreetly with existing roof tiles. They incorporate a factory fitted round felt sleeve which penetrates the felt, so no extra slee…
Explore rangeRange & components
Tile and Slate Cowl Vents
Corovent Cowl vents offer unobtrusive low or high level ventilation in tile roofs. The Cowl vent can blend almost invisibly to any roof: new build or conservation, because of Ar…
Explore rangeRange & components
Ridgeline Vents
Corovent Ridgeline Vents are designed to replace a normal ridge tile suiting most concrete and clay ridges. Their unique design allows them to be fitted without cutting any exis…
Explore rangeRange & components
Eaves Ventilation
Eaves ventilation is a simple and effective way of providing the necessary air movement within a cold roof. It is most effective when used in conjunction with high level roof ve…
Explore rangeRange & components
Rafter Trays
The rafter tray maintains a clear air space of either 10 or 25mm from the eaves to the roof void, by creating a barrier for the roofspace insulation.
Explore rangeRange & components
Soffit Vents
Ariel provide a range of soffit vents designed for use with a traditional fascia and soffit board. Available in black, brown or white, soffit vents can be used with any roof pitch.
Explore rangeRange & components
Ventilation Accessories
An extensive range of high quality ventilation accessories for easier and quicker installation of Corovent Roof Ventilation products.
Explore rangeProduct & project support
A question about Interlocking and Plain Tile Cowl Vent (Small) CV10K/CP10K?
Keep this product context with your enquiry and let Ariel confirm the next step.
Source & review information
Content imported from Ariel’s published product information, captured 27 October 2026. Final technical/content approval is pending; current stock, delivery and warranty assurances are not asserted. Source reference (opens a new tab) ↗